All plants, any make
Solar, wind, hybrid and storage in one portfolio view, with every inverter, turbine, logger and meter mapped to one data model.
Products · AssetWatch · for plant owners
Every plant, every lost unit, priced
Monitoring for solar, wind and hybrid portfolios: every lost unit explained by its cause and priced in rupees, from the SCADA and loggers you already have.
Any inverter, turbine or logger makeRead-only: data flows one wayPriced on cited chargesThe map and land live in ClimeQuant Twin
What it answers
Eight questions every owner asks, on one screen
The last two are where ClimeQuant is different: we know what each unit is worth under each state's rules.
Revenue against budget
Expected against actual, by month and year, with the gap split into weather and each technical cause.
Breakdowns and downtime
Duration, mean time to repair, lost units and lost rupees for every fault.
Soiling and cleaning
Soiling loss by block, a cleaning log, and a prompt to clean when the lost units are worth more than the cleaning.
Early warnings
From module to grid meter, and from gearbox to pitch: trends caught before they become breakdowns.
Every O&M team
Tickets raised automatically, with SLAs and a scorecard for each team and contractor.
Forecasts and deviation charges Our edge
Day-ahead and intraday schedules, deviation charges by plant, and what tighter tolerance bands would cost you.
Bill check and green credits Our edge
Units generated, delivered after losses and credited in each consumer's bill, with banking, RECs and CO₂ for BRSR.
Live demo
The performance command centre
An example portfolio of seven Gujarat plants: four solar, two wind and one hybrid, 229 MW in all. The plants, faults, consumers, spares and contracts are illustrative. The loss rates, tolerance bands and emission factor are the real values, from the same parameter library as our research. Click around: every number on every screen adds up.
AssetWatchPerformance demo · example Gujarat portfolio
The demo needs JavaScript. It shows portfolio KPIs, each plant's blocks and turbines, the loss from budget to actual, forecasts against deviation bands, a check of consumers' bill credits, and maintenance, spares, warranties, compliance and O&M contracts.
Five layers
Answers to money questions, not just charts
Each layer works on its own, so you can start with the first and add the rest.
| Layer | What you get | Solar | Wind |
|---|---|---|---|
| 1 · Asset mapThe map | Every block, inverter, transformer and turbine on the GIS map of ClimeQuant Twin, with its land, drawings and warranties. | Drone orthomosaic and thermal scans | Turbine layout, feeders and pooling substation |
| 2 · Live dataThe data | SCADA, logger, meter and portal data in one model, every 1 to 15 minutes. | Monitoring to IEC 61724-1 | 10-minute SCADA data (IEC 61400-25) |
| 3 · PerformanceThe physics | Expected output from the weather actually measured, and a cause for every gap. | Irradiance, module temperature, soiling, shading, clipping | Power curve per turbine, air density, wake, yaw |
| 4 · Early warningsThe warnings | Fixed rules from the first day, and learned models once 6–12 months of history exist. | Strings, inverters, transformers, cleaning | Gearbox, bearings, generator, pitch and yaw |
| 5 · CommercialWhere we are different | Forecasts and deviation charges, revenue against each contract, bill credits and banking for captive and open-access consumers, RECs and CO₂. Priced on the same cited charges as our Open Access Charges Tracker. | ||
Asset management
Run the plant, not just watch it
Monitoring tells you what broke. Asset management makes sure the right part is in stock, the warranty claim goes in on time, the O&M contractor pays for missed availability, and no inspection or permit lapses. A fault, a work order and a warranty all point at the same inverter.
See it in the demo- Warranties and claims: product, performance and EPC defect-liability periods, with reminders before each one ends and the fault history to back a claim.
- Spares: stock by site against minimum levels set from lead times, and what each stock-out cost in lost units.
- Maintenance: preventive plans (cleaning, thermography, transformer oil tests, turbine services) issued as work orders to each team, plus corrective work raised from alarms.
- O&M contracts: availability against the guarantee each month, and the damages owed, worked out from the contract's own formula.
- Compliance: electrical inspections, fire and pollution permits, insurance, forecasting agreements and captive-status checks, each with its due date.
Start free with a year of your data
The Plant Health Check reads your generation CSV in the browser and shows breakdown days, under-performing days, data gaps and the gap to P50, priced at your tariff.
Pilot
Start with one or two plants
Tell us about your portfolio. An engineer will call within one working day to plan a pilot, usually on your existing inverter portals so that no hardware is needed. How we connect your plants.
- A loss review of your last 12 months, free, before the pilot starts
- Your deviation-charge exposure under today's and tighter bands
- A fixed quote: one-time integration per plant and an annual fee per MW
Questions
Before you ask
Do we have to replace our SCADA or monitoring portal?
No. AssetWatch reads from what you already have: inverter and turbine makers' portals, data loggers, plant SCADA and meters. Where a plant has none, we fit an edge gateway.
Which makes do you support?
Any inverter, turbine, logger or meter that speaks Modbus (including SunSpec), OPC UA, IEC 60870-5-104 or IEC 61850, or that has a portal API. The demo above has seven makes in one model.
How is weather separated from real losses?
Expected output is calculated from the irradiance, temperature and wind actually measured at the plant. Weather therefore explains only the gap against the annual budget (P50). Breakdowns, curtailment, soiling and under-performance are counted against the expected output, so each technical loss has an owner and a fix.
Can our captive or open-access consumers see their share?
Yes. A consumer view shows each consumer's units, bill credits and CO₂ by month, ready for their BRSR report.
How is AssetWatch different from ClimeQuant Twin?
AssetWatch is about performance and money: lost units, revenue, deviation charges and bill credits. ClimeQuant Twin is the map of your portfolio: land parcels, equipment, operations and maintenance. They use the same data and work together or on their own.
What does it cost?
A one-time integration fee per plant, based on the number of devices, and an annual fee per MW. We give a fixed quote after the site survey. Forecasting, drone thermography and advisory are optional.